Industrial Demolition
FacebookYou TubeGoogle+ TwitterLinkedIn

Environmental Decommissioning

Decommissioning a facility and property includes removal of hazardous materials and waste; cleaning and removal of equipment; decontamination and remediation; and, termination of environmental operating permits.

Anderson GM Plant before decommissioning Anderson GM Plant after decommissioning
Before - This project consisted of the environmental decommissioning and dismantling of the approximately 2,300,000 square feet of the existing GM manufacturing facility located in Anderson, Indiana. After - The photo shows the brownfield left after the environmental decommissioning of the property. Click here for complete details on this project. Special thanks to Google Maps.

NADC not only has the capability to dismantle a site, they can also decommission a site. The process involves specific steps to correctly complete a facility's environmental decommission:

  • Hazardous material and waste: Once identified, removal and off-site management of hazardous material and petroleum products in necessary; which may include solvents, compressed gas cylinders, water waste treatment chemicals, lubricants and wastewater. This must be accomplished by licensed personnel to ensure that the material is properly over-packed and lab-packed within properly labeled containers, including preparing the manifest for shipment and disposal.

  • Equipment: Equipment that cannot be re-used, is typically cleaned and shipped to another facility or sold. This type of equipment usually includes the components of water and wastewater pretreatment systems, process piping, and industry-specialized equipment. Decontamination involves removing, purging, and proper disposal of liquids, solids and gases contained in equipment and the rinsing or high pressure washing of the equipment with water and detergent. When required, NADC completes chemical analysis of any wipe samples taken from washed equipment to document that residual hazardous substances have been removed.

  • Decontamination and remediation: Any remaining intact building surfaces (floors, walls, and ceilings) that may be contaminated and require decontamination must be identified. Typically this includes maintenance rooms, water and wastewater treatment areas, chemical storage rooms, hazardous waste storage rooms, flammable storage rooms, manufacturing areas, and other locations that had been subject to spills. If the facility is going to brownfield, NADC will take the necessary steps to comply with all Federal, State and Local regulations for environmental cleanup.

  • Termination of environmental operating permits: NADC will assist in preparing the Notice of Permit Termination to the appropriate regulatory authorities. Permits to terminate include: RCRA hazardous waste generator identification, air emission permit, industrial sewer use permit, NPDES point source and storm water discharge permit, flammable storage permit, and other possible permits based on the type of facility being decommissioned.

Request a Quote Today

Please contact us for more information on decommissioning your facility.

 

NADC
IN THE NEWS

D&Ri Top 100POWER DOWN

For the P.H. Glatfelter Paper Co. project, NADC used a Volvo EC700CHR ultra high reach demolition excavator with LaBounty MSD 1500 hydraulic rotating shear to deftly dismantle two chemical boiler buildings and electrostatic precipitator as well as related ductwork and piping.
>> Read Story

NADC Listed in Top 100 of the 2015 D&RI 100 List >> More

NADC remains in the Engineering News-Record Magazine Top 600
>> More

 
Toll Free: 800-664-3697 | Fax: 810-664-6053Demolition Specialist
 
National Demolition Association

 

© 2006—2015 North American Dismantling Corp. | Trademarks shown are the property of their respective owners.

Web Site Design & Hosting by